GEAR REDUCERS

The UZ gear reducer is very compact, with helical gears, and with an aluminum crankcase. It is a low cost reducer with high availability. At customer's request, it can be supplied with rectified gears, improving its smoothness and longevity.

Helicoidal gears

Type UZ

Power range: 0,37 kW até 3 kW

Torque range: 8 - 215 Nm

Ratio: 6,2 - 19,1 : 1

Sizes: 2

Housing: Aluminum

Downloads:

Gear reducers have been produced since the 1960s, from the old Swedish company ASEA. Robustness, long service life and low maintenance are its main characteristics.

Helicoidal gears

Type UFD

Power range: 0,12 kW até 22 kW

Torque range: 8 - 5650 Nm

Ratio: 6,3 - 245 : 1

Sizes: 6

Housing: Grey cast iron

Downloads:

Gear reducers have been produced since the 1960s, from the old Swedish company ASEA. Robustness, long service life and low maintenance are its main characteristics.

Helicoidal gears

Type UABD

Power range: 0,12 kW até 22 kW

Torque range: 8 - 5650 Nm

Ratio: 6,3 - 245 : 1

Sizes: 7

Housing: Grey cast iron

Downloads:

Gear reducers have been produced since the 1960s, from the old Swedish company ASEA. Robustness, long service life and low maintenance are its main characteristics.

Worm gears

Type V

Power range: 0,18 kW até 4 kW

Torque range: 10 - 716 Nm

Ratio: 7,5 - 70 : 1

Sizes: 8

Housing: Grey cast iron

Downloads:

Gear reducers have been produced since the 1960s, from the old Swedish company ASEA. Robustness, long service life and low maintenance are its main characteristics.

Worm gears

Type L

Power range:: 0,18 kW até 4 kW

Torque range:10 - 716 Nm

Ratio: 7,5 - 70 : 1

Sizes: 9

Housing: Grey cast iron

Downloads:

Gear reducers have been produced since the 1960s, from the old Swedish company ASEA. Robustness, long service life and low maintenance are its main characteristics.

Worm gears

Type R

Power range: 1,5 kW até 90 kW

Torque range: 345 - 10 607 Nm

ratio: 7,5 - 69 : 1

Sizes: 10

Housing: Grey cast iron

Downloads:

© 2018 Olimar S.A. 

Construções Eletromecânicas

Domingos Francisco Ramilo

Lugar de S.Pedro, 2380 Alcanena, Portugal

info@olimar.com.pt

www.olimar-metalomecanica.com

Tel: + 351 249 889 200